Rendering & Plastering in Pickering

Plastering covers a wide range of interior and exterior finishing work — from full room re-plasters and skim coats over existing surfaces to patch repairs, floating and setting, and lime plaster work on period properties.

Ceiling plastering is one of the more demanding plastering tasks — working overhead, holding wet plaster to a horizontal surface and achieving a flat, smooth finish that shows every imperfection under raking light.

Bathroom plastering requires different materials and greater care than plastering in dry rooms.

Skimming is a thin finish coat of plaster — typically 2–3mm — applied over an existing surface to produce a smooth, even base for decoration.

Plaster repairs address localised failures in existing plaster — cracked, hollow-sounding or damaged sections that need cutting out and re-plastering without disturbing the rest of the surface.

Kitchen plastering covers the full range of plasterwork involved in kitchen installation and renovation — from replastering walls and ceilings before units are fitted to patching walls after old units are removed and making good around new service penetrations.

Whole-house plastering covers replastering every room in a property as a single project — typically required after purchasing a property in poor condition, after major water damage, or as part of a complete renovation.

Plasterboarding — fixing plasterboard to stud walls, timber frames, masonry using dot-and-dab or direct bonding — provides the flat substrate that is then skimmed to a smooth finish.

Old ceilings are one of the most common domestic plastering jobs — and the decision about what to do with them has a big impact on cost, disruption and the quality of the finished result.

Artex is a textured coating applied to ceilings and walls in UK homes between roughly the 1950s and early 2000s.

Post-rewire plastering covers the making-good of all plasterwork disturbed during an electrical rewire — chased channels in walls and ceilings for new cables, back-box recesses, ceiling penetrations for new lighting circuits and consumer unit locations.

Loft conversion plastering covers the full range of plasterwork involved in finishing a new loft room — boarding out the roof structure, plastering the walls and ceiling to a decorated finish, and attending to the stairwell opening and landing walls created by the conversion.