Skimming in Cross Gates
Skimming is a thin finish coat of plaster — typically 2–3mm — applied over an existing surface to produce a smooth, even base for decoration.
- Free Survey & QuoteNo obligation — confirmed within one working day
- 17+ Years ExperienceTrusted across Yorkshire since 2009
- Fully InsuredPublic liability & workmanship cover on every job
- Manufacturer AccreditedApproved installer — warranty-valid on every system
Skimming — what you need to know
Skimming is a thin finish coat of plaster — typically 2–3mm — applied over an existing surface to produce a smooth, even base for decoration. It is the right approach where existing plaster is sound and well adhered but rough, textured or previously coated (such as Artex or painted Artex), and a flat finish is needed without the disruption of a full replaster. Skimming is faster and less expensive than full replastering and produces the same quality of finish when the substrate underneath is genuinely sound.
Cross Gates has a notable concentration of 1930s interwar semi-detached properties with solid cavity-wall construction on the main residential streets — original internal plaster in these properties from the 1930s is frequently being replaced during full renovations, with lath-and-plaster ceilings particularly common in the older part of the suburb.
Free · No Obligation
Get a quote for Skimming in Cross Gates
We visit your property, assess the work and give you a fixed written quote. No call centres, no pressure, no hidden charges.
Request Free SurveyOr call +447774708801Common situations we resolve
Postwar dot-and-dab plasterboard walls with visible joints and ridges needing a skim to produce a flat decorating surface
Artex or textured ceilings that need a flat finish without full removal
Walls sound but slightly rough or uneven and cannot be decorated directly
Previously painted walls stripped to reveal a coarse plaster surface
New plasterboard surfaces that need a skim finish before decoration
Property considerations in Cross Gates
Cross Gates is an east Leeds suburb predominantly developed in the interwar and post-war periods, with semi-detached and terrace properties in brick along the main roads and on the residential estates. The housing stock includes both solid-walled interwar properties and cavity-walled post-war homes. Cross Gates has a local shopping centre and good bus connections to Leeds city centre. The area has a strong residential character and a significant owner-occupier community.
Cross Gates's east Leeds position means standard Yorkshire rainfall — interwar solid-walled properties in the area benefit from maintained external render as weather protection.
Cross Gates & surrounding areas
Our approach
Surface assessment
We check whether the existing plaster or substrate is sound and suitable for skimming — if there are hollow sections, active damp or poorly adhered areas, these must be resolved before skimming, or the skim coat will fail over them. Artex surfaces are assessed for adhesion and whether a bonding coat is needed first.
Preparation
The surface is cleaned and PVA adhesion primer is applied to control suction and ensure the skim coat bonds correctly. Any protruding fixings are countersunk. Edges and reveals are checked for straightness.
Skim coat application
A thin finish coat of plaster is applied in two passes — a scratch pass to fill the surface and a trowelling pass to bring the surface to a flat, smooth finish. Corners and reveals are checked with a straight edge during application.
Finishing
The skimmed surface is trowelled back to a smooth, consistent finish and left to dry. Once dry, the surface is ready for a mist coat and decoration — drying time depends on the skim thickness, ventilation and ambient conditions.
What determines the cost
We provide fixed written quotes — what you are quoted is what you pay. The factors below determine where your project sits within the range for this type of work.
- Surface area to be skimmed — walls and ceilings measured in square metres
- Surface condition — Artex or heavily textured surfaces require a bonding coat and additional preparation time
- Whether hollow sections need cutting out before skimming can proceed
- Ceiling height and access requirements
- Number of rooms or areas involved and the sequencing of the work
The most accurate way to understand the cost for your specific property is a free on-site survey. We assess the substrate, take measurements and provide a full itemised written quote.
Why homeowners in Cross Gates choose us
- One team throughout — no subcontractingThe same experienced team that surveys your property carries out the work and completes the final inspection — clear accountability from first visit to handover.
- Free survey, no obligationWe visit your property, assess the substrate, take measurements and provide a written quote with an honest recommendation. No pressure to proceed.
- Specialists — rendering and plastering is all we doOur specialism means better system knowledge, more careful application, and finishes that perform as the manufacturer intended.
Related services in Cross Gates
Skimming in nearby areas
Common questions
The plasterboard walls in our house have visible joints and ridges — can skimming fix this?
If the joints are raised because they were not correctly taped and filled before the previous skim, the only reliable fix is to re-skim over a correctly prepared surface. If the boards themselves are not flat — because they are not fixed at the correct spacing or the studs behind are not plumb — the boarding needs addressing before a new skim will produce a flat result. We assess which issue applies during the survey.
Is skimming better than full replastering?
Skimming is the right choice when the existing plaster is sound — it is faster, less disruptive and less expensive. Full replastering is needed when the existing plaster is hollow, damp-damaged or otherwise failing. We assess this during the survey and recommend whichever approach is genuinely right for the surface.
Can Artex be skimmed over?
Artex can be skimmed if it is well adhered, relatively flat and in sound condition. A bonding coat is applied first to control suction. Heavily textured or spiked Artex is harder to skim successfully — the pattern may show through in raking light. We advise on whether skimming or removal is the more appropriate approach for the specific surface during the survey.
Do you need to move furniture before skimming?
For ceiling skimming, furniture should be moved out or to the centre and covered. For wall skimming, sockets and switches need to be loosened to allow the skim to run behind the faceplate for a clean finish. We advise on exactly what needs moving before the job starts.
Useful guides for skimming in Cross Gates
Ready to transform your property?
Get a free, no-obligation quote from Yorkshire's premium rendering and insulation specialists. We typically reply within one working day.