Artex Ceiling in Selby
Artex is a textured coating applied to ceilings and walls in UK homes between roughly the 1950s and early 2000s.
- Free Survey & QuoteNo obligation — confirmed within one working day
- 17+ Years ExperienceTrusted across Yorkshire since 2009
- Fully InsuredPublic liability & workmanship cover on every job
- Manufacturer AccreditedApproved installer — warranty-valid on every system
Artex Ceiling — what you need to know
Artex is a textured coating applied to ceilings and walls in UK homes between roughly the 1950s and early 2000s. The most common goal now is to achieve a flat, smooth ceiling over it — either by skimming over it (the most practical approach in most cases), by overboarding with new plasterboard, or, where Artex is confirmed free of asbestos and the circumstances suit, by controlled preparation before skimming. One important consideration applies to all Artex work: Artex manufactured and applied before 2000 may contain chrysotile (white asbestos). Before any work that disturbs the surface — sanding, scraping, drilling — a sample should be tested by an accredited laboratory. We do not dry-sand, dry-scrape or mechanically disturb suspect Artex. Skimming over undisturbed Artex does not raise the same risk and is the approach we most commonly recommend.
Selby's market town centre properties and the Victorian housing in surrounding villages include a mix of original plaster substrates — many require patch repair or full re-plaster during renovation. Rural properties in Sherburn-in-Elmet and Snaith frequently have older internal plaster that has deteriorated and requires replacing before redecoration.
Free · No Obligation
Get a quote for Artex Ceiling in Selby
We visit your property, assess the work and give you a fixed written quote. No call centres, no pressure, no hidden charges.
Request Free SurveyOr call +447774708801Common situations we resolve
Artex ceilings in any textured pattern — stipple, swirl, bark, fan or other — that the homeowner wants replaced with a flat smooth surface
Artex that is flaking, cracking or bubbling where the coating has partially failed
Ceilings that cannot be repainted satisfactorily over the existing texture and need a smooth surface for decoration
Period properties where heavily patterned Artex looks out of place and a flat ceiling more appropriate to the property's character is wanted
Artex that has been painted multiple times and the surface is thick, uneven and cracking
Property considerations in Selby
Selby is a market town with a mixed housing stock — Georgian and Victorian properties in the town centre, interwar semis in the suburbs, and more modern development on the periphery. The district covers a significant rural area with villages including Sherburn-in-Elmet, Snaith, Eggborough and Carlton, each with older housing that may include original render or lime plaster in need of attention. The district sits in the low-lying Vale of York.
The Vale of York experiences consistent annual rainfall, and the relatively flat, open landscape means exposed properties can face significant driving rain — particularly relevant for external render maintenance.
Selby & surrounding areas
Our approach
Assessment and asbestos check
We assess the Artex condition, adhesion and texture depth. For properties built or refurbished before 2000, we advise that a sample is tested by an accredited laboratory before any work that disturbs the surface. Testing is straightforward and removes the uncertainty. We advise on how to arrange testing if required before we proceed.
Approach agreed
Once the asbestos position is established and the ceiling assessed, we agree the approach: skim over undisturbed Artex (most common), overboard with new plasterboard, or (where the Artex is confirmed safe and the texture suitable) a controlled preparation before skimming. The approach depends on the Artex type, texture depth and the ceiling's overall condition.
Preparation
For skimming over Artex, a bonding coat is applied to the Artex surface to control suction and improve adhesion of the skim coat. For overboarding, the new boards are fixed securely to the ceiling structure, joints taped, and the surface prepared for skimming. Any loose, flaking or unsound areas of Artex are stabilised before the main work begins.
Skim coat to smooth finish
A skim coat of finish plaster is applied to produce a flat, smooth ceiling. The finished surface is ready for a mist coat and decoration once dry. We leave the room clean before departing.
What determines the cost
We provide fixed written quotes — what you are quoted is what you pay. The factors below determine where your project sits within the range for this type of work.
- Ceiling area — the primary cost driver
- Artex texture depth — deeply patterned Artex is harder to skim and may require overboarding instead
- Whether overboarding is selected over skimming — adds board cost but avoids surface preparation concerns
- Number of rooms involved
- Ceiling height and access requirements
The most accurate way to understand the cost for your specific property is a free on-site survey. We assess the substrate, take measurements and provide a full itemised written quote.
Why homeowners in Selby choose us
- One team throughout — no subcontractingThe same experienced team that surveys your property carries out the work and completes the final inspection — clear accountability from first visit to handover.
- Free survey, no obligationWe visit your property, assess the substrate, take measurements and provide a written quote with an honest recommendation. No pressure to proceed.
- Specialists — rendering and plastering is all we doOur specialism means better system knowledge, more careful application, and finishes that perform as the manufacturer intended.
Related services in Selby
Artex Ceiling in nearby areas
Common questions
Does Artex contain asbestos?
Artex manufactured and applied before 2000 may contain chrysotile (white asbestos). Not all pre-2000 Artex contains asbestos — but without a test from an accredited laboratory, you cannot be certain. If your property was built or refurbished before 2000 and you do not have documentary evidence the Artex is asbestos-free, treat it as potentially containing asbestos. Do not dry-sand, dry-scrape, drill or apply heat to the surface before the position is established.
Can Artex be skimmed over without removing it?
Yes — skimming over undisturbed Artex is the most common approach and does not carry the same risk as sanding or scraping it. The Artex must be well adhered and in sound condition. A bonding coat is applied first to control suction and improve adhesion, then a skim coat of finish plaster brings the ceiling flat. Deeply patterned Artex may show through the skim if the texture is very pronounced — we advise on this during the assessment.
What happens if the Artex turns out to contain asbestos?
If the test confirms asbestos is present, skimming over the undisturbed Artex remains a practical option for most domestic situations — this is one reason skimming over rather than removing is the standard recommendation. Overboarding the ceiling with new plasterboard over the existing Artex is another option that encapsulates rather than disturbs it. Removal of confirmed asbestos-containing material is regulated work and must only be carried out by appropriately licensed operatives.
Will deeply patterned Artex show through a skim coat?
It can — especially with very pronounced spiked or deeply textured patterns. For most standard patterns (stipple, swirl, light fan), a bonding coat and skim coat produces an acceptably flat result. For very deep patterns, overboarding is the more reliable approach. We assess the texture depth and adhesion during the survey and advise accordingly.
Ready to transform your property?
Get a free, no-obligation quote from Yorkshire's premium rendering and insulation specialists. We typically reply within one working day.